<nav id="auoee"><strong id="auoee"></strong></nav>
  • <nav id="auoee"><strong id="auoee"></strong></nav>
    <xmp id="auoee">
    • <xmp id="auoee">

    • 64 Gbps Dual DP3T RF MEMS Relay Supplier | High-Quality Relays and Switches Manufacturer from Taiwan | Bright Toward Industrial Co., LTD.

    The MM5620 is a specialized relay that supports fast and high-quality signal switching for advanced technology standards such as PCIe Gen 5, Gen 6, and SerDes. Its Ideal Switch? technology from Menlo Micro allows it to operate at high speeds of up to 64 GT/s or 20 GHz, while also maintaining low insertion loss and a fast switching speed for reliable performance.

    Additionally, the MM5620 can handle over 3 billion switching cycles and comes in a compact system-in-package (SiP) solution that includes a switch driver and charge pump controlled through SPI or GPIO interfaces by a host processor. This integration also includes loopback capacitors, which helps to reduce the overall board footprint for high-volume production test solutions.

    As a result, the MM5620 switch provides high data rate and high-speed differential data applications, making it an ideal solution for space-constrained final test and probe test for a variety of products, including smart phones, graphics and network processors, microprocessors, accelerators, and high-speed memory products.

    Bright Toward serves as Menlo Micro's technical support and distributor in Asia. Please contact us for more information. B.T is a high-quality RF MEMS Switch, Opto-MOS Relay ,Opto-MOSFET Relays, Reed Relay, Solid State Relay manufacturer from Taiwan. With more than 30 years relay manufacture experience, Bright Toward is specialised in manufacturing different kinds of relays. since 1988

    service@relay.com.tw

    Contact Us

    64 Gbps Dual DP3T RF MEMS Relay

    64 Gbps Dual DP3T RF MEMS Relay with Loopback / Bright Toward Industrial Co., Ltd is a manufacturer of Solid State Relays, Reed Relays and MEMS Switches.

    64 Gbps Dual DP3T RF MEMS Relay - 64 Gbps Dual DP3T RF MEMS Relay with Loopback
    • 64 Gbps Dual DP3T RF MEMS Relay - 64 Gbps Dual DP3T RF MEMS Relay with Loopback
    64 Gbps Dual DP3T RF MEMS Relay
    MM5620

    The MM5620 is a specialized relay that supports fast and high-quality signal switching for advanced technology standards such as PCIe Gen 5, Gen 6, and SerDes. Its Ideal Switch? technology from Menlo Micro allows it to operate at high speeds of up to 64 GT/s or 20 GHz, while also maintaining low insertion loss and a fast switching speed for reliable performance.

    Additionally, the MM5620 can handle over 3 billion switching cycles and comes in a compact system-in-package (SiP) solution that includes a switch driver and charge pump controlled through SPI or GPIO interfaces by a host processor. This integration also includes loopback capacitors, which helps to reduce the overall board footprint for high-volume production test solutions.

    As a result, the MM5620 switch provides high data rate and high-speed differential data applications, making it an ideal solution for space-constrained final test and probe test for a variety of products, including smart phones, graphics and network processors, microprocessors, accelerators, and high-speed memory products.

    Bright Toward serves as Menlo Micro's technical support and distributor in Asia. Please contact us for more information.

    Add to List
    Inquire Now
    Features
    • Ideal Switch? Technology provided by Menlo Micro
    • DC to 20 GHz range, up to 64 Gbps
    • Differential, Dual DP3T
    • Insertion Loss 2.4dB @ 16GHz
    • High reliability >3B switching cycles
    • Built-in AC coupling capacitors
    • SPI and GPIO interface
    • 8.2 mm x 8.2 mm LGA
    Contact Form
    • Differential, Dual DP3T (*For more details, please see the below diagram.)
    MM5620-Functional Block Diagram

    MM5620's High-speed (HS) loopback path supports 64 GT/S PAM4

    MM5620-Functional Block Diagram
    Frequency
    • 20 GHz
    • 64 Gbps
    On Resistance (Ω)
    • 3
    Insertion Loss
    • 2.3dB @16GHz
    ESD Protection
    • 500V
    MM5620 - Double Density HSIO Loopback Mode Test

    Test Two PCIe 4/5/6 lanes at high speed using ONE MM5620 device:

    MM5620 - Double Density HSIO Loopback Mode Test

    TX0_X <--> RX0_X (HS1<--> HS2) at speed test / TX1_X<-->RX1_X (HS3<-->HS4) at speed test
    *LS signals can be shared for low frequency and DC sweep test
    *Two transmitters can be ALWAYS ON to reduce test time
    *Fully bi-directional signal paths

    MM5620 - High Speed Loopback Path Eye Diagram
    PCIe Gen5: +/-400mV, NRZ, 32 GBps, PRBS 2^15-1 (De-embedded)

    PCIe Gen5: +/-400mV, NRZ, 32 GBps, PRBS 2^15-1 (De-embedded)

    PCIe Gen5: +/-400mV, NRZ, 32 GBps, PRBS 2^15-1 (De-embedded)

    PCIe Gen5: +/-400mV, NRZ, 32 GBps, PRBS 2^15-1 (De-embedded)

    MM5620 - MEMS Switch Control Block Diagram

    MM5620 SPI converter controls high-voltage push-pull outputs (HVout1, HVout2, HVout3, HVout4)

    MM5620 - MEMS Switch Control Block Diagram
    MM5620 - Port Mapping Diagram
    MM5620 - Port Mapping Diagram
    MM5620 - Measured S-parameters
    HS1_HS2 CAL Lines with AFR disabled (On Board 2X Thru Fixtures)

    HS1_HS2 CAL Lines with AFR disabled (On Board 2X Thru Fixtures)

    HS3_HS4 CAL Lines with AFR disabled (On Board 2X Thru Fixtures)

    HS3_HS4 CAL Lines with AFR disabled (On Board 2X Thru Fixtures)

    Case 1: HS1 to HS2

    HS1_HS2 Path with AFR enabled | HS1_HS2 Path with AFR disabled

    Case 1: HS1 to HS2
    Case 2: HS3 to HS4

    HS3_HS4 Path with AFR enabled | HS3_HS4 Path with AFR disabled

    Case 2: HS3 to HS4
    Case 3: LS1 to LS2

    LS1_LS2 Path with AFR disabled

    Case 3: LS1 to LS2
    Case 4: HS1 to HS3

    HS1_HS3 Path with AFR enabled | HS1_HS3 Path with AFR disable

    Case 4: HS1 to HS3
    Case 5: HS2 to HS4

    HS2_HS4 Path with AFR enabled | HS2_HS4 Path with AFR disable

    Case 5: HS2 to HS4
    Case 6: HS1 to LS1

    HS1_LS1 Path with AFR disabled

    Case 6: HS1 to LS1
    Case 7: HS2 to LS2

    HS2_LS2 Path with AFR disabled

    Case 7: HS2 to LS2
    Case 8: HS3 to LS1

    HS3_LS1 Path with AFR disabled

    Case 8: HS3 to LS1
    Case 9: HS4 to LS2

    HS4_LS2 Path with AFR disabled

    Case 9: HS4 to LS2
    Application
    • Semiconductor Test Boards
    • 5G IC Testing
    • PCIe IC Testing
    • Switched Filter Banks and Tunable Filters
    • High Power RF Front Ends
    • Antenna Tuning
    • Wireless Infrastructure
    • 5G Base Stations
    Related Products
    6 GHz SP4T micro-mechanical RF MEMS Switch - DC to 6GHz, RF MEMS Switch SP4T
    6 GHz SP4T micro-mechanical RF MEMS Switch
    MM5140

    This high-power SP4T RF MEMS switch enables highly reliable switches capable of greater than...

    Details Add to List
    26 GHz SP4T micro-mechanical RF MEMS Switch - DC to 26GHz, RF MEMS Switch SP4T
    26 GHz SP4T micro-mechanical RF MEMS Switch
    MM5130

    This is a high-power SP4T micro-mechanical RF MEMS Switch. Our innovative technology enables...

    Details Add to List
    DC to 18 GHz, SP4T RF MEMS Switch - DC to 18GHz, RF MEMS Switch SP4T
    DC to 18 GHz, SP4T RF MEMS Switch
    MM5120

    This is a high-frequency (DC to 18GHz) SP4T micro-mechanical RF MEMS Switch. It is a highly...

    Details Add to List
    16 GHz SP4T micro-mechanical RF MEMS Switch (ESD Enhanced) - RF MEMS Switch (ESD Enhanced) 12GHz SP4T
    16 GHz SP4T micro-mechanical RF MEMS Switch (ESD Enhanced)
    M4AG

    This is a High power SP4T micro-mechanical RF MEMS Switch (Length*Width*Height: 5.8*5.8*1.9mm)....

    Details Add to List
    40 Gbps DPDT RF MEMS Switch - 40Gbps DPDT Differential Switch with Integrated Driver
    40 Gbps DPDT RF MEMS Switch
    MM5600

    This is a DPDT switch for high-speed differential signal switching. The MM5600 is based on Menlo...

    Details Add to List
    3 GHz SPST (6 channels) micro-mechanical RF MEMS Switch - DC to 3GHz, RF MEMS Switch SPST*6
    3 GHz SPST (6 channels) micro-mechanical RF MEMS Switch
    MM3100

    This is a high power (25W per channel) six-channel SPST micromechanical switch offered in a 6.0mm*6.0mm...

    Details Add to List
    3Amps/150V SPST (6 channels) micro-mechanical RF MEMS Switch - 150V/3A SPST*6, Six channels MEMS Switch
    3Amps/150V SPST (6 channels) micro-mechanical RF MEMS Switch
    MM1200

    This is a 6 Channel SPST micro MEMS Relay intended for power and signal switching applications...

    Details Add to List
    5V to 90V Booster IC - 5V to 90V Booster IC
    5V to 90V Booster IC
    MD05-90

    This is a Booster IC with a 5V input; it outputs a 90V high-voltage driving force. This IC is designed...

    Details Add to List
    Download
    MM5620 Data Sheet
    MM5620 Data Sheet

    64 GT/s Dual DP3T RF MEMS Relay

    Download

    B.T - 64 Gbps Dual DP3T RF MEMS Relay Manufacturer

    Located in Taiwan since 1988, Bright Toward Industrial Co., LTD. is a relay supplier and manufacturer. Main products, including Opto-MOSFET Relays, Opto-SiC MOSFET Relays, Solid State Relays, Reed Relays, and RF MEMS Switches.

    B.T supplies relays to the world's semiconductor and automotive industries for over three decades and has long term long-term partnerships with OKITA Works based in Japan; Menlo Microsystems based in California; JEL Systems based in Japan and Teledyne Relays and Coax Switches based in California. Mainly serve the Semiconductor Testing, ATE, BMS (Battery Management Systems), industrial machinery and Electric Vehicle industries.

    B.T has been offering customers high-quality Opto-MOSFET and Opto-SiC MOSFET relays since 1988, both with advanced technology and 30 years of experience, B.T ensures each customer's demands are met.

    国产xxxx99真实实拍